Florence Bridge
Illinois River Highway Crossing
Florence, IL

Florence Bridge

• Structure ID: NBI 000086000118825
• Location: River Mile 56.0
• River Elevation: 420 Feet
• Highways: IL-100, IL-106
• Daily Traffic Count: 1,350 (2005)
• Bridge Type: Steel Truss W/Lift Span
• Bridge Length: 3,178 Feet, 217 Foot Longest Span
• Bridge Width: 23 Feet, 2 Lanes
• Navigation Channel Width: 202 Feet
• Height Above Water: 27 Feet
• Date Built: Built 1929, Reconstructed 2004
Florence was a location where travelers seemed to want to cross the Illinois river in the 1800s. After a ferry was organized, the line waiting to cross the river was often several hours long. The bridge was installed as part of the US highway system. It carried US-36 until the new Valley City Eagle Bridges were built as part of the I-72 project in 1988. US-36 is now multiplexed on I-72 in western Illinois. Given that I-72 is only a few miles to the north, the Florence bridge is very lightly used.

The bridge consists of 4 Parker style through truss spans, the main lift span, and then 4 more Parker style through truss spans. There is a lengthy causeway on the east end of the crossing, and a very short fill on the west end.

The Florence bridge was refurbished in 1981, and refurbished again in 2004. In the 2004 project, the deck was replaced, the bridge was sandblasted and painted, the lift cables were replaced, a new operators house was built, and electrical work was performed.

During the Civil War, the 99th Illinois Infantry was composed of men from the area around Florence, most of whom lived in Pike County. They left for St. Louis to join the war August 23, 1862, from a spot near the bridge. A monument marks the spot where they loaded onto a riverboat. The unit was under fire 62 days before the war ended.


Florence Bridge
Florence Bridge
Florence Bridge
Florence Bridge

Home  Return To Illinois River Structures Home Page
Photo and text by John A. Weeks III, Copyright © 2007, all rights reserved.
For further information, contact: john@johnweeks.com